The ranges includes various products for solving all the needs of a CANopen line like extension of the line, increase of nodes number, isolation of CANopen branches, protection from spikes noise and electrostatic charger or simply to change the communication baudrate.
The HD67117 and HD67117M devices are repeaters/isolators for CANopen buses.
The HD67117R, HD67117-A3 and HD67117-A4 devices are repeaters/isolators with a 3kV isolation between the two CANopen bus.
The HD67402 serie are rugged devices that can be located on cars, trucks, trains, boats and any other machines that needs to isolate/repeat a portion of CANopen bus network.
With his particular metal enclosure, equipped with four fixing lugs, makes available the mounting of the device in any plane surface (horizontal, vertical, oblique).
It is possible to have the devices varnished or totally resined and also in both cases with Mini-Fit connectors or AMP SuperSeal 1.5 connectors.
If is resined, the enclosure, like the AMP SuperSeal 1.5 connectors is waterproof. Otherwise, if is not resined, the connectors are always waterproof, but the enclosure is IP65.
The HD67117F and HD67117FSX are converters from CANopen to Fiber Optic.
The FSX version allows to get the maximum distance of 2000m, also using a baudrate of 1Mbps.
CANopen/Optic Fibres - Repeater - Extender bus line
( High Performance )
-40° to +85°
As a repeater, strictly said, that transfer the signal from one device to another without any processing of the signal itself: the use of a repeater is appropriate when the lines are electrical noise or transfer distances are high and you must use a extensor line, for very large distances, it is advisable to use the Fibres optic devices that have coverage up to 2 km.
As isolator, the device can be inserted in two lines of the same protocol for passing data, but in a way that they still remain galvanically isolated.
As bridge: if the signal to be transferred needs to be changed in speed (baudrate) in this case, the repeater device can also be used as a bridge.
Otherwise if you want to manipulate the signal further (CobId, filter, etc..) Is useful to use our device to CANopen or CAN Bridge: